Juletræer støbt i resin støbemix

1   Measure 50 g resin cast mix and 35 ml water.

2   Mix together water and resin cast mix.

3   Stir until smooth and even.

4   Pour the mixture into the mould, leaving around 5 mm below the edge of the mould.

5   Jab the end of a spoon up and down in the mixture 10–20 times to prevent air bubbles.

6   Tap the mould gently against the table for a few minutes to remove all air bubbles. Allow to dry for 2 hours.

7   Remove from the mould.

8   Decorate the tree with glitter glue in the colour of your choice. Repeat the same process for the second Christmas tree.