5576b6114f5ab.jpg)
Creative idea
Jewellery School. Finishing with End Caps
#v12366
Fold-over cord ends and end caps are used when finishing your bracelets and necklaces with a clasp. All of them have a hole for attaching a clasp. The difference is: Fold-over cord ends are used for squeezing around soft cords. End caps are used for all types of metal chains which are glued in place with strong glue.
#v12366
How to do it
1. .jpg)
Fold-over cord end:
Place the cord (3mm) inside the fold over cord end. Squeeze the two sides around the cord; one side at the time.
Fold-over cord end:
Place the cord (3mm) inside the fold over cord end. Squeeze the two sides around the cord; one side at the time.2. .jpg)
Squeeze using flat nose pliers.
Squeeze using flat nose pliers.3. .jpg)
Attach a clasp to the hole on the fold-over cord end with a round jump ring.
Attach a clasp to the hole on the fold-over cord end with a round jump ring.4. .jpg)
Another variant:
May be used for several thin cords (2mm).
Another variant:
May be used for several thin cords (2mm).5. 
End Cap (2mm):
Apply a small blob of Super Attak Instant Glue to the inside of the end cap. Insert the cord (2mm) into the end cap with the glue. Keep it in place until the glue has dried.
End Cap (2mm):
Apply a small blob of Super Attak Instant Glue to the inside of the end cap. Insert the cord (2mm) into the end cap with the glue. Keep it in place until the glue has dried.6. .jpg)
End cap (6mm):
Gather several cords with masking tape. Glue the cords together.
End cap (6mm):
Gather several cords with masking tape. Glue the cords together.7. .jpg)
Squeeze the cord ends with flat nose pliers so that they fit inside the end cap before the glue on the cord ends has dried.
Squeeze the cord ends with flat nose pliers so that they fit inside the end cap before the glue on the cord ends has dried.8. .jpg)
Apply a small amount of glue to the end cap. Insert the bunch of cord ends into the end cap and glue. Keep the cord ends in place until the glue has dried.
Apply a small amount of glue to the end cap. Insert the bunch of cord ends into the end cap and glue. Keep the cord ends in place until the glue has dried.Also go exploring in
Others have also looked at
{{ getVariationsCountLabel() }}
